gkillmaster Posted February 10, 2014 Share Posted February 10, 2014 Hi David, Thanks for your post. I recently tried to set up something very similar. I'm attempting to play multiple instruments on different tracks by assigning different midi channels on those tracks as you suggest. I have a keyboard capable of sending midi out to up to 16 tracks (Korg M1). The idea is to swich the midi transmit channels in order to play the different tracks, sometimes multiple tracks at the same time. I'm using iConnectMIDI2+ interface and Logic X. I did verify that midi is being transmitted correctly from my keyboard (using midi monitor) and that Auto Demix it clicked on. The thing that is a little different about my set up is that I want to trigger multiple tracks that are set to the same midi channel. In other words channel 1 might have an instance of Massive and another track on midi channel 1 with an instance of Alchemy. On channel 2, an instance of Kontakt and channel 3 an instance of Zebra. When I switch channels from my keyboard, only the first instance of the tracks that have the same midi channel plays. All the tracks are selected and record enabled. I tried using track stack folders but it still didn't work. Any hints? I've been at this for some time so I've double and triple checked this. Set it up in brand new files to start clean etc... Quote Link to comment Share on other sites More sharing options...
Jordi Torres Posted February 10, 2014 Share Posted February 10, 2014 The thing that is a little different about my set up is that I want to trigger multiple tracks that are set to the same midi channel. In other words channel 1 might have an instance of Massive and another track on midi channel 1 with an instance of Alchemy. On channel 2, an instance of Kontakt and channel 3 an instance of Zebra. When I switch channels from my keyboard, only the first instance of the tracks that have the same midi channel plays. All the tracks are selected and record enabled. I tried using track stack folders but it still didn't work. That's all normal, unfortunately. If you have more than one track set to receive say, MIDI channel 2 data, only one of those tracks will respond. J. Quote Link to comment Share on other sites More sharing options...
gkillmaster Posted February 10, 2014 Share Posted February 10, 2014 thank you for the clarification. Is there a way around this? Quote Link to comment Share on other sites More sharing options...
Jordi Torres Posted February 10, 2014 Share Posted February 10, 2014 thank you for the clarification. You're welcome. Is there a way around this? That would depend on your goal...but please open a thread in the Logic forum for this question. Thanks. J. Quote Link to comment Share on other sites More sharing options...
robinloops Posted March 9, 2014 Share Posted March 9, 2014 This works fine when using Plug in instruments, but what about rewire instruments from Reason When you create an external midi instrument and convert it to a Reason Rewired instrument, the inspector doesn't give you the option to set up a receive channel. I see "bus and channel" but they do not respond the same way as a plug in channel in logic. Any suggestions? Thanks! I found the best way to control instruments in reason is to use a virtual midi port and use external midi tracks in logic to control them. That way you always have all your tracks sequenced in one DAW and you can just work within Logic and arm appropriate tracks, etc. Quote Link to comment Share on other sites More sharing options...
robinloops Posted March 9, 2014 Share Posted March 9, 2014 The problem I'm running into when I try to use this approach is that any selected track will be triggered by MIDI data coming in on any channel. Is there a workaround for this? Quote Link to comment Share on other sites More sharing options...
gkillmaster Posted March 9, 2014 Share Posted March 9, 2014 The problem I'm running into when I try to use this approach is that any selected track will be triggered by MIDI data coming in on any channel. Is there a workaround for this? I'm not 100% sure this is what you are after but here's a link to a similar discussion on Logic Pro Help Forum: viewtopic.php?f=1&t=104427 Quote Link to comment Share on other sites More sharing options...
robinloops Posted March 9, 2014 Share Posted March 9, 2014 Thank you gkillmaster. Unfortunately that isn't what I'm trying to do. I only want to control one instrument at a time. What I need is for controllers to 'only' control one thing and not always be sending midi info to selected track (regardless of channel). It would also be nice to simply disable particular devices from sending info to soft synths while still being able to interact with mixer to serve as a control surface. The problem is that any track that is selected receives midi from any channel (even if set to a specific channel). So for example if everything is set up (as discussed in topic or the other one) and I'm using my AxiomPro on channel 2 and say a drum controller on channel 10 they both play as expected from each controller BUT only if I don't select either of the tracks. Otherwise the selected track plays notes from all controllers connected (even generic midi control surfaces that send midi note data for on/off buttons). So if I'm playing something on the axiom mdii keyboard (channel 2) while the drum track (channel 10) is selected, the axiom will trigger notes on the drum. I could live with the inconvenience of having to make sure no track is selected when playing or recording on software instrument tracks but where this is causing the biggest issue is that all my control surfaces send midi notes info. So even though the launchpad sends midi on channel 1, it triggers notes on any selected track whenever I try to use it. Since simple mapping requires use of 'selected track' (for example to use a single rotary to control pan on 'selected track' not being able to selct trancs while using a control surface would render it (control surface) unusable. So i'm either looking for a workaround (somehow getting autodemix to filter out info coming from control surface buttons, even on selected track) but preferably a way to simply set devices as control surface exclusive or midi keyboard exclusive so that it is a permanent global solution. Like for example the Axiompro61 and my drum pads could control soft synths but bottons on control surfaces would be ignored and not play notes on selected track. I played around in the environment but removing controller from note input and cabling straight to sequencer causes same problem and if put into a dummy device it won't send anything at all not even to mixer. I would have to assume that I am doing something wrong because I can't imagine that Logic can only work with high end dedicated logic controllers. I mean otherwise why would it even allow for set up of generic devices (that can't be used anyway)? Quote Link to comment Share on other sites More sharing options...
tall paul Posted July 3, 2014 Share Posted July 3, 2014 I am having difficulty record-arming multiple software instrument tracks. I have followed the steps described, but I can seldom arm all the tracks, as often, arming track 2 will disarm track 1 etc. I may get down 4 or 5 but then arming no 6 will disarm most the ones already armed.... I remember this (bug) from V8. - or am I missing something? I have several midi tracks each on their own midi channel, (auto demix on) and 1 audio track in this scenario. Thanks in advance Quote Link to comment Share on other sites More sharing options...
juha-pekka kuusela Posted April 6, 2015 Share Posted April 6, 2015 How this is done with older Logic pro i mean 9.1.8 ? i found it again. i search few minutes it and even correct place and dont see it funny but now i have another problem with this thing what i try solve when i read again this "tutorial". Quote Link to comment Share on other sites More sharing options...
juha-pekka kuusela Posted April 6, 2015 Share Posted April 6, 2015 How this is done with older Logic pro i mean 9.1.8 ? i found it again. i search few minutes it and even correct place and dont see it funny but now i have another problem with this thing what i try solve when i read again this "tutorial". Now works expect midi "blocks" i mean them which are in default light muted green) updated not so correct way but at least midi data is recorder and both split sides play own parts... even making how is split done this keyboard is thing what i forgotted now i remember... Quote Link to comment Share on other sites More sharing options...
wjlljam Posted April 26, 2015 Share Posted April 26, 2015 Hello. I perfectly understand the guidance, however, still have a problem that I am not able to solve. I am using a workstation keyboard to play the channels 1 and 2 for example. But when I turn off channel two on the keyboard, the two channel in Logic Pro continues sounding, if channel 1 is on the keyboard. I want for example, play channel 1 above C4 and channel 2 below C4, but I'm not getting it. It is a procedure that do easily at Sonar X. Thanks if anyone can help. Quote Link to comment Share on other sites More sharing options...
wjlljam Posted April 26, 2015 Share Posted April 26, 2015 Hello! I then immediately got play the channels separately below and above C4 on each channel. Not found where cancel the previous post. So it can be disregarded Quote Link to comment Share on other sites More sharing options...
wjlljam Posted April 26, 2015 Share Posted April 26, 2015 Well, excuse me back to the question, but the problem persists if I am selected in Logic Pro track 1. When I select the track 2, I can play separately above and below C4. I believe then that has no solution. Quote Link to comment Share on other sites More sharing options...
fiji100 Posted November 4, 2017 Share Posted November 4, 2017 Any tips on how to do this in Logic 9? Quote Link to comment Share on other sites More sharing options...
Eric Cardenas Posted November 4, 2017 Share Posted November 4, 2017 It’s pretty much the same procedure for Logic Pro 9. Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted November 5, 2017 Author Share Posted November 5, 2017 Any tips on how to do this in Logic 9? A link to your other thread in case it helps anyone else: https://www.logicprohelp.com/viewtopic.php?f=1&t=134006 Quote Link to comment Share on other sites More sharing options...
praecox Posted March 20, 2021 Share Posted March 20, 2021 This is my topic with problems which refers to this -please help. Thanks. viewtopic.php?f=1&t=156310 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.