Jump to content

Use Audio Interface Inserts for sends eg for External Tuner/Amp/Etc


kingminotaur

Recommended Posts

I have an external tuner I prefer for tuning guitars , basses etc. But I go direct into interface and don't use amps.

 

I have a Behringer Euphoria with INSERTS on each of the 4 tracks, and I learned how to use the inserts as a send for the tuner.

 

Simply take a 2 conductor regular mono guitar cable and push it partially into the insert jack, to the first clear click.

 

In my unit that leaves about 1/4" of the normally hidden barrel visible. ( The barrel that would usually go all the way in to the guitar amp)

 

That will SEND signal out on that guitar cable to whatever you need. I have it going to a tuner.

 

WARNING: If you plug a regular mono guitar cable ALL THE WAY it interrupts without returning, and the channel will appear DEAD. Nothing will register on input and you'll hear nothing. Inserts are primarily designed for sending AND returning via a 3 conductor plug.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...