JakobP

Sounds like you've connected the key lab both with usb and through midi cable ? That's a big big Nono in Logic, you're risking project corruption by doing that...

And now that it's working, make sure to copy the .cs preference file to have a backup in case the controller assignments gets messed up...

I'd also make sure "Automatic Installation" is unchecked under "New" in the CSS window... (Although I guess the B+ shouldn't be recognised as an MCU when in user mode?)

How did you import exactly ? Have you tried it following these steps ? Import data and settings from other Logic Pro for Mac projects

Fwiw, it looks like the e-cores are utilised a fair bit on that screenshot ?

Now you need to press and hold the option key when dragging...

I was suggesting setting the channel to 10, not all.

I'm guessing this is a midi channel issue, i.e. your Roland kit is transmitting notes on channel 10, and your software instrument is set to respond only to that channel. When creating new notes with your mouse those will be on channel 1, so Superior Drummer won't sound. In the track inspector, you can set the "MIDI Out Channel" to 10, to have all notes going to the instrument "re-channelized" to 10, then all notes should sound... I don't know Superior Drummer, but it's possible you can set the midi channel in there to "all" or "omni" as an alternative fix.

I believe you're referring to this thread... 😉

Same here...

Can't reproduce here either, on 14.3.1 and 10.7.9...

So you probably have enabled direct monitoring on your interface, then you'll hear the vocals even without Logic running, obviously... EDIT The volume dropping would be caused by phase cancellation then...

Another (quick) alternative is to insert a Modifier midi fx with these settings on the instrument channel strip. It will convert the cc11 to cc1 ""on the fly"...

Have you moved the project start marker away from 1.1.1.1 ?

Afaik, that has not been determined yet...